Collecting water in a rain barrel can be easy, environmentally friendly, and cost-effective. However, once the water is in the barrel, the question becomes what to do with it! Most people use their collected rain to water their lawns, gardens, etc. However, rain barrels generally use only gravity to push water out of a garden hose, which is only somewhat effective, as there’s not much pressure. By adding a pump to your rain barrel, you can do much more! An Algreen Rain Barrel Pump Kit (compatible with any Algreen Rain Barrel), the pump provides significantly more oomph to the water flow, enabling you to use your rain barrel to water the lawn and garden much more effectively.
The Algreen Pump Kit is also quite helpful should you wish to chain more than one barrel together. The Rain Barrel Pump will move water from one barrel to another as needed.
This pump is a great add-on to any of the elegant Algreen Rain Barrels on the market. It is easy to install and durable. This article provides a detailed look at the product’s functionality and specs and reviews it.
If you’re still looking for a rain barrel, be sure to check out our reviews of the Best Rain Barrels to find the right one for your needs.
Algreen Rain Barrel Pump Kit Review
The Algreen 500gph rain barrel pump kit an elegant rain barrel pump system, is easy to use, and works great with any Algreen rain barrel. It comes with hose fittings which allow any gardener to connect the water pump with any garden hose, or to connect two barrels together.
Basic Specs
- All-In-One Kit Includes Pump/Garden Hose Connection Fittings and Clamps
- Allows for Direct Watering of Garden from up to 2 Rain Barrels
- 500 Gallons Per Hour Submersible Pump with Flow Control
- Brass fitting for rain barrel connection
- Rain Barrels are Bottom-Connected for Consistent Water Levels
Dimensions and Capacities
- Product Dimensions 8 x 4.5 x 6 inches
- Item Weight 3 pounds
- Water Volume 500 gallons per hour
The Details
The Algreen 500 GPH Rain Barrel Pump Kit is a water conservation tool that allows you to drain water effectively from any rain barrel. It has enough water pressure to pump water from the bottom of the barrel, this eliminates the need to elevate your barrel or build a barrel stand.
Functionality
The submersible pump which runs on 120 AC volts (a standard wall style plug) can be used to pump water from a rain barrel. A hose can be directly connected to the pump for watering flowers, vegetables, and lawns. It can also be used to transfer water from one barrel to another for water sharing.
The Algreen Rain Barrel Pump Kit has enough pressure to water plants but struggles to run a sprinkler. It has a control switch in the pump to control the water pressure, so if you need to tweak the pressure, the control switch is a good place to start.
Water Pressure
At the max pressure of 63 PSI, the pump has sufficient pressure to lift water from the bottom up to the top of a 5 feet barrel. However, using the standard assembly instruction guide, a gardener can only get a small trickle of water from the barrel, a relatively small quantity which makes it not advisable to connect with a soaker hose.
Experienced gardeners put their rain barrels on a riser, and connect directly to the pump for faster and uninterrupted water flow. Another option is to connect the larger hose directly to the drain port or hole, for stronger pressure while the pump transfers water from one barrel to another.
Materials and Build Quality
This Kit is a quality pump manufactured by Algreen products. The pump is water-proof, and the electronics inside the device are protected from corrosion. It is sturdy and could survive a 3 ft. drop. However, dropping it or throwing it is not advisable.
Installation
First, connect a hose to the pump. Then remove the top screen from the rain barrel and let the pump pass through the hole. Feed the other end of the hose and the electric cord through the back hole of the barrel. With that, you’re ready to pump.
For shared barrels, just connect the two barrels by connecting the two drain holes together using a hose. For detailed instructions on this device please refer to this Algreen Rain Barrel Pump instructional guide [pdf].
Safety
To avoid electrocution, do not plug the electric cord when installing the pump, especially when there is already water in the barrel. The pump doesn’t have an on and off switch, so be sure to unplug the device when not in use. The pump runs on 120V, which is standard US power, with no option for battery use.
Do not plug the device on if there is no water, as the pump could malfunction and burn out.
Accessories
The Algreen Rain Barrel pump kit is designed to work with any Algreen Rain Barrel. If you haven’t picked up a rain barrel yet, take a look at our review of the Algreen Castilla Rain Barrel. It is an excellent choice for many homes.
Additionally, you may want to pick up a garden hose for use with the pump, if you don’t already have one. We quite like the Flexzilla Garden Hose line, reviewed here.
Cleaning and Maintenance
To clean the device and prevent clogging due to moss or any material build-up, simply remove the top cover and remove the pump. Remove the hose and clean the port or fitting hole of the pump using a sponge or small plastic brush.
The Bottom Line
In the end, the Algreen 500 gal Rain Barrel Pump Kit is a must-have for those who already have their beautiful Algreen rain barrels.
This pump kit will help save time, money, and energy in transferring water from one barrel to another or watering your garden.
- All In One Kit Includes Pump/Garden Hose Connection Fittings and Clamps
- Allows for Direct Watering of Garden from up to 2 Rain Barrels
- 500gph Submersible Pump with Flow Control
- Rain Barrels are Bottom-Connected for Consistent Water Levels
- All In One Kit Includes Pump/ Garden Hose Connection Fittings and Clamps
Last update on 2025-09-07 / Affiliate links / Images from Amazon Product Advertising API
Leave a Reply